OxyRevo Space60 Pro Hard-Shell Sitting Hyperbaric Chamber – Up to 2.0 ATA

A hard-shell sitting chamber for pressures up to 2.0 ATA

The Space60 Pro is OxyRevo's higher-pressure hard-shell sitting chamber, built for working pressures up to 2.0 ATA. The stainless steel body has panoramic windows on each side and a large transparent door, so the cabin feels open rather than boxed in. Inside, a folding chair lets you sit upright or recline, and touchscreen controls inside and outside the chamber set the working pressure in ten steps from 1.1 to 2.0 ATA. A built-in communication system, LED reading light, dual pressure displays and four solid wheels round out the cabin, and the system comes with an all-in-one machine unit and a 10 L oxygen concentrator (90–97% oxygen). Choose White, Black, Silver or Blue.

Best for: Homes and commercial wellness centers that want a seated, higher-pressure hard-shell chamber with touchscreen controls and a built-in communication system.

What a session looks like

Step through the transparent door, settle into the folding chair (upright or reclined) and close the door. From the touchscreen you choose the working pressure and set the timer anywhere from 0 to 120 minutes, and oxygen is delivered through a mask. Controls and pressure readouts are available both inside and outside the chamber, and the phone and speaker system lets you talk with someone outside. At the end of the session pressure is released gradually before you open the door. The manufacturer also describes a power-failure safety system that lowers the pressure slowly if power is lost.

Space, power and setup

Hard-shell chambers are heavy and typically arrive crated or on a pallet. Before you order, measure the delivery route and doorways, confirm the floor can carry the weight, and plan a dedicated electrical circuit for the machines. Four solid wheels make it easier to position once it is in the room. At a glance: working pressure up to 2.0 ATA; length 83″ (210 cm); width 34″ (86 cm); height 60″ (153 cm); weight 1,760 lbs (800 kg). Setup is a matter of connecting the wires and tubes from the operating unit to the chamber, according to the manufacturer; professional installation is still recommended, and optional on-site White Glove installation service is available at an additional charge. Free shipping applies to the continental U.S. only.

OxyRevo lists a long set of optional upgrades for this model: a red light panel (660 nm red and 850 nm near-infrared, 24 V DC low voltage, powered from outside the chamber through an airtight porthole), a water-chiller air conditioner (110V/220V, adjustable -10 to 20 °C), a switchable standard-mask / BIBS-mask valve, a 20 L all-in-one oxygen concentrator, an adjustable TV holder with USB Bluetooth speaker, and a multi-function power chair. Ask our team about availability and pricing.

Choosing the right model

Want a choice of 1.5 or 2.0 ATA builds and two widths? See the OxyRevo Space60. Prefer to lie flat? The Quest series offers 1.5–2.0 ATA in 30-, 34- and 36-inch widths. OxyRevo also lists a narrower 30-inch Pro Mini width for this model; ask our team about availability.

Not sure which size, pressure or configuration fits your space? Call 1-762-214-2594 (Mon–Sun 9am–9pm EST) or request a quote, and our product specialists will help you compare options and plan delivery and installation. Payment plans may be offered at checkout depending on order total and lender approval.

Questions buyers ask

What pressures can I set?

The touchscreen sets ten working pressures from 1.1 to 2.0 ATA, so you can start low and step up to the 2.0 ATA maximum.

Can I run it myself?

Yes. According to the manufacturer, one person can operate the chamber alone using the control panels, valves, gauges and screens that are mounted both inside and outside.

Is a chair included?

Yes, a folding chair for sitting upright or reclining is part of the system. A multi-function power chair is listed by OxyRevo as an optional upgrade; ask our team about it.

What does the all-in-one machine unit contain?

An oil-free air compressor, a 10 L oxygen concentrator, two cooling machines, an anion air purifier, an air sterilizer, an air filter and a humidity water container.

Is on-site installation available?

Yes. Optional White Glove on-site service is available for an additional charge. Ask our team for a quote.

A hyperbaric chamber is a pressurized, oxygen-enriched environment. Use only as directed in the manufacturer's manual, keep flames, sparks and heat sources away, and consult a physician before use, especially if you have a medical condition or are pregnant. Not intended to diagnose, treat, cure, or prevent any disease or medical condition. Results vary. Refer to the manufacturer's labeling for regulatory status and intended use.